Sign In | Join Free | My components-electronic.com
China BOTO GROUP LTD logo
BOTO GROUP LTD
BOTO MACHINE TODAY'S QUALITY IS THE MARKET FOR TOMORROW
Verified Supplier

4 Years

Home > Salt Spray Test Chamber >

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

BOTO GROUP LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

Brand Name : BOTO

Model Number : BT

Certification : CE ISO

Place of Origin : CHINA

MOQ : 1 SET

Price : Negotiation

Payment Terms : L/C, T/T, Western Union

Supply Ability : 100000Set/month

Delivery Time : 20-30workdays

Packaging Details : PLY-WOODEN CASE

Power : Electronic, 220V 50HZ

Design standard : GB/T 10587-2006, GB/T 10125-1997

Test chamber volume : 108L/270L/600L/1440L or custom made

Spray quantity : 1.0~2.0ml/80cm2/h

PH : 6.5~7.2 3.0~3.2

Test chamber temperature : NSS.ACSS 35°C±1°C/CASS 50°C±1°C

Saturated air cylinder temperature : NSS.ACSS 47°C±1°C/CASS 63°C±1°C

Color : Customer's Request

Warranty : 12months

Contact Now

Salt Fog Corrosion Testing Machine / Salt Spray Ageing Chamber / Salt Mist Resistance Tester Salt Spray Test Chamber

Reference standard The brine spray test mainly refers to the reference standard: JIS, ASTM, CNS, GB standard parameter setting.

Product instruction

Box material
A test case is made of light gray PVC board with a thickness of 5mm and a durable temperature of 85 ℃. The structure is firm.
The second laboratory cover is sealed with transparent acrylic impact resistant plate with a thickness of 5mm. Double layer thickening inside and outside the edge to prevent distortion due to long-term high temperature. The thickness is 15mm.
It is easy to clean and operate.
The best heat preservation effect is achieved by using sus ා 304 stainless steel high pressure resistant barrel.
5. The test sample rack adopts the plane dividing type, which can adjust the angle arbitrarily, the fog falling on all sides is uniform, the fog receiving is completely consistent, the test results are accurate, and the number of test samples is large.

Air supply system

The air pressure is 1kg / cm2 and adjusted in two stages. The first section is about 2kg / cm2, which is equipped with inlet air filter and drainage function. The second stage is precisely adjusted 1kg / cm2, 1 / 4 pressure gauge, with accurate display.

Spray mode
One bernoult principle absorbs salt water and then atomizes. The atomization degree is uniform, and there is no blocking crystallization phenomenon, which can ensure the continuous test. The two nozzles are made of tempered glass, which can adjust the spray volume and the ejection angle. Three spray volume 1~2ml/h can be adjusted (ml/80cm2/h standard requires testing 16 hours for average). The metering cylinder adopts embedded installation, which is beautiful and neat in appearance, convenient for observation and reduces the installation space of the instrument.
Standards:

1)GB/T2423.17-2008/IEC 60068-2-11 Test method for salt spray

2)ASTM.B117-2009 Test method for salt spray

3)JIS H8502 Test method for saline spray

4)GB/T10125-2012/ISO 9227-2006Test method for saline spray

5)GB-T5170.8-2008 Test method for environmental test equipment for electrical and electronic products - salt spray test equipment

6)GB-T5170.11-2008 Test method for corrosive gas test equipment

7)GB-T10587-2006 Technical conditions of salt spray test chamber

8)GBT 20121-2006 / ISO11474-1998 Corrosion of metals and alloys - corrosion tests in artificial atmospheres - outdoor accelerated test under salt spray - scab test

Specifications
Product Name

Salt Fog Corrosion Testing Machine / Salt Spray Ageing Chamber / Salt Mist Resistance Tester Salt Spray Test Chamber

Product Model MQ-YW-60 MQ-YW-90 MQ-YW-120 MQ-YW-160 MQ-YW-200
Volume(L) 108 270 480 800 1440

Internal Size

W×H×W(mm)

600×400×450 900×500×600 1200×500×800 1600×500×1000 2000×600×1200

External Size

W×H×W(mm)

1150×1090×672 1450×1200×842 2080×1285×1240 2480×1520×1450 2900×1550×1650
Performance Index Temperature Range

LaboratoryTemperature Range :RT~50℃

Saturated air barrelTemperature Range :RT~63℃

Temperature Deviation ±1.0℃
Temperature Uniformity ≤2.0℃
Temperature Fluctuation ±0.5℃
Heating Rate

Test Room RT→+50℃≤60 min

Pressure Barrel RT→+63℃≤60 min

Salt fog deposition 1~2ml/80 square meter (At least 16 hours were collected and averaged)
Spray Pressure 70~170Kpa
Spraying Mode Continuous spray
Test time 1~999(S,M,H)adjustable
PH 6.5~7.2 3.0~3.2
Main Part Control System LCD touch screen temperature controller
PT100 thermocouple (armor), PID control
Spraying System The Nozzle is made of special glass material, the size and angle of spray can be controlled
operate manual spray or set automatic spray according to program
Structural Features Material Enclosure Imported PVC polyethylene board is adopted
Medicament refill cylinder hidden type supplementary water gauge
Pressurized air drum SUS304# stainless steel high-pressure barrel
Test Rack The plane indexing frame can be used to adjust the Angle of fog falling or being foggy at any direction
Cover Material imported European acrylic board
Spray Tower air atomizing nozzle, height can be adjusted
Spray volume collector Cone funnel with diameter of 100mm
Heating System Titanium alloy heat pipe, steam heating, P.I.D. control heating
Brine Tank Made of PVC board
Saturated air barrel SUS304 Stainless
Drain line acid and alkali resistant PVC piping
Heater

Titanium alloy armored electric heating tube (test chamber bottom heating)

SUS316# stainless steel armoured heating tube (saturation barrel)

Standard Fittings 1 set of nozzles, 2 fog collecting and measuring cylinders, 2 fog collecting collectors, etc
Safty Device Leakage, short circuit, motor overheating, overload, over current protection
Supply Voltage AC220V 50Hz
Environment Requirement Temperature 5.0~+30.0℃,Humidity≤85%RH,Air Pressure 86Kpa~106Kpa

Product Effects

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

BOTO ADVANTAGE

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

Customers photos

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

OUR TEAM

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

Our Services

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:

Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.

2) Specifications customize process:

Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.

3) Production and delivery process:

We will produce the machines according to confirmed PO requirements. Offering photos to show production process.

After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.

Deliver the products in confirmed shipping time and inform customer.

4) Installation and after sale service:

Defines installing those products in the field and providing after-sales support.

Packing & Delivery

  • PP film first
    2. Vacuum package
    3. PP film again
    4. 10mm thickness PU foam to avoid collision
    5. Strong wooden case
    6. Standard BOTO MACHINE MARK

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber

Our Services

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:

Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.

2) Specifications customize process:

Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.

3) Production and delivery process:

We will produce the machines according to confirmed PO requirements. Offering photos to show production process.

After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.

Deliver the products in confirmed shipping time and inform customer.

4) Installation and after sale service:

Defines installing those products in the field and providing after-sales support.


Product Tags:

7.2ph Aging Salt Spray Test Chamber

      

2.0ml Salt Spray Test Chamber

      

2.0ml salt mist chamber

      
Buy cheap 2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber product

2.0ml Salt Spray Test Chamber Mist Resistance 7.2ph Aging Salt Fog Test Chamber Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: BOTO GROUP LTD
*Subject:
*Message:
Characters Remaining: (0/3000)